Automatic Tank Nozzle Welding Machine for Threaded Couplings and Fittings
Welding a threaded nozzle onto a tank sounds simple, but it often causes scrap. The nozzle shifts, the seam is uneven, spatter lands on the thread, and quality changes from one welder to the next.
The HAOYU Automatic Tank Nozzle Welding Machine is built to remove these problems. It uses MAG (Metal Active Gas) welding, with a clamping fixture and a rotating system, to weld threaded nozzles, half couplings and fittings onto tank shells and heads in a fixed, repeatable cycle.
Automatic welding machine for nozzle on shell
Nozzle welding machine for water heater tank
Common Problems in Tank Nozzle Welding
| Problem on the shop floor | How this machine handles it |
|---|---|
| Nozzle sits off-center or tilted | Fixture holds the nozzle concentric with the opening |
| Uneven seam, leaks at the joint | Controlled rotation gives a continuous, uniform seam |
| Spatter or heat damage on the thread | Torch angle and parameters are set to protect the thread |
| Quality depends on the welder | Saved welding programs give the same result every shift |
| Slow changeover between nozzle sizes | Adjustable fixtures for quick size change |
| Hard to hire skilled welders | Load, clamp, start: basic training is enough |
Key Features
- MAG welding process: Mixed shielding gas (Ar + CO₂) and continuous wire feed give deep penetration and a strong, sealed joint on carbon steel .
- Program memory: Save current, voltage, travel speed and wire feed for each nozzle size and wall thickness, then recall them in seconds.
- Custom configuration: Fixtures, stroke and power supply are made to match your tanks.

Which Tanks and Nozzles Is It For?
- Tank types: fuel tanks, water and expansion tanks, air receivers, hydraulic tanks, LPG tanks, stainless steel process tanks.
- Nozzle types: threaded nozzles, half couplings, full couplings, pipe fittings, drain and vent connections.
Other nozzle welding machine for your reference:
Storage Tank Nut Ring Seam Welding Machine
Automatic Nipple Welding Machine for Water Heater Tank

Technical Parameters
| Item | Specification |
|---|---|
| Product Name | Tank Thread Nozzle Welding Machine |
| Welding Process | Gas shielded welding (MAG) |
| Applicable Workpiece | Threaded nozzles, couplings, fittings on tanks / pressure vessels |
| Applicable Materials | Carbon steel |
| Nozzle Size Range | 25mm-50mm |
| Tank Diameter Range | Φ300 –750 mm |
| Tank Length Range | MAX1500MM |
| Tank Thickness | 3-10mm |
| Welding Power Source | AOTAI NBC400P PLUS |
| Welding Wire Diameter | 1.0– 1.2 mm |
| Shielding Gas | Ar + CO₂ mixture |
| Control System | PLC + touch screen |
| Machine working voltage | 220V Single-phase(customizable) |
| Customization | Fixtures, stroke and voltage can be customized |
How It Works
1.The tank is placed on the positioner or support rollers, and the nozzle is loaded into the fixture.
2.The nozzle is aligned and clamped at the opening position.
3.The torch moves to the preset welding position and shielding gas is released.
4.The arc starts, and the circumferential seam is welded as the workpiece or torch rotates.
5.The arc closes automatically with crater filling, then the gas stops and the workpiece is released.
Our Service
I.Sales Term
- Payment term: 30% T/T advance along with the purchase order, balance should be cleared before dispatch.
- Delivery time: 40 days on receipt of payment in advance
- Warranty: 12 months for the whole machine.
II.Service Support
We have always been committed with the service idea of customer-centric, supply Installation, adjustment, training and maintenance in pre-sales and after-sales service.
1.Pre-sales Service
Before signing contract, customers can get production plan, technical consultant and equipment suggestion and etc.
2. Training
Customers can get free technical training in China factory. Mainly training are as follow:
- Training for machine
- Basic daily cleaning and maintenance for the machine
- Solutions for common hardware problems
FAQ
1.Can it weld both carbon steel and stainless steel tanks?
Yes, with the right wire and shielding gas for each material.
2.Will the welding damage the nozzle thread?
The setup is designed to limit spatter and heat on the thread. For thread-critical parts, we suggest a sample test first.
3.Can one machine handle different nozzle sizes?
Yes. Fixtures are adjustable or interchangeable within the agreed size range.
4.Can I send my tank or nozzle sample for a test?
Yes. Send drawings or photos and we will discuss a trial.
5.What do you need to quote?
- Nozzle type and size range
- Tank diameter and length
- Material and wall thickness
- Daily output target
- Local power supply (voltage / frequency)
Hot Tags: automatic mag tank nozzle welding machine, manufacturers, suppliers, factory, price, for sale, cylinder welding machine, gas tank for welding machine, tank welding machine, welder gas tank, welder tank, welder tanks for sale
